|



|
|
| Z-Stop® Zinc Strips Quick Facts |
 |
|
Z-Stop normally sells for $55.00
SPRING SALE $36.50 includes NAILS & SHIPPING!!
That's $18.50 off original price so order now sale ends May 31st! |
| • |
Z-Stop is a roll of 99.2 % pure zinc material 2 1/2 inches wide by 50 feet long (.8% inert ingredients) |
| • |
Z-Stop Fastens to the top of the roof, on both sides of the ridge cap, below chimneys, dormers, etc. |
| • |
26 Neoprene-washered Z-Stop nails included with each roll |
| • |
Z-Stop is solid Zinc, it will not rust and it will keep protecting your roof for 20+ years or more |
| • |
Free Shipping in the Continental USA! |
Z-Stop
is easy to use

Tools needed: Hammer and Scissors |
- On roofs
with moss, algae, mildew or fungus, the
existing growth must first be removed (by
pressure washing or brushing), then the
root systems must be chemically treated
and destroyed (see magazine articles for
bleach solution). Install Z-Stop zinc strips
to keep it from growing back.
- Apply Z-Stop zinc strip
by butting it up against the ridge cap
against both sides of all roof peaks (see
graphic). Apply Z-Stop below anything that
blocks rain water flow such as chimneys, gables and
skylights. Rain water
must run over Z-Stop to become effective.
- Nail Z-Stop zinc strip
approximately every two feet with neoprene washered roofing
nails (Z-Stop Nails included in each
roll).
In
areas of severe moss, algae, mildew or fungus
growth, several horizontal rows of Z-Stop
application may be necessary to assure
its effectiveness over the entire roof
surface.
|
NOTE:
Please exercise reasonable caution when doing any kind
of work on roofs. Use ladders designed for this purpose.
We strongly recommend you follow instructions for chemicals
and pressure washer completely. If you are unsure of your
skills please consider hiring a professional roofer to
clean your roof and install Z-Stop. |
|